Fanuc S servo digital exchange, used surplus fully tested, and NEW are available on the A06B-6058-H003 Fanuc AC single axis servo amplifier drive unit. The drive is normally fitted with either Fanuc Model 2-0S, 0-0SP, 0S servo motor. The servo amp is a sm

5.9Nm TRQ, 6.8 Amp, 3 phase 110V 2000RPM with and without brake, straight or tapered shaft, keyed or not keyed, with V cut or special waterproof seals and any combination off. Of this generation the 0512 series Model 5 motor - probably was the biggest sel

Features:1. Applied with current forward-feedback control, speed observer and inertia detection functions which ,in turn, greatly improve the responsiveness performance.2. Updated with control switch function which in turn reduce overshoot and adjustment

Characteristic 1. Power supply voltage 400V 2. Be used to drive various mechanical feed shaft Wide Selection: 1.0kW to 5.0kW, holding brake options 3. Feedback: 17-bit s incremental/absolute encoder, Resolver 4. Protection level: IP65voltage 200VAC Ser

Drive controllerb maXX 4400 uses the principle of vector control for maximum dynamic response. Position control, speed control and current control are integrated and have a cycle time of 125 µs. As a result, the motor is powered in a fast and precise mann

The six installation sizes for the DSD-range of Baumuller offer a suitable solutions for almost every application in the automation. The servo motors for highly dynamic applications with the highest requirements of acceleration capacity and the best start

The UM/UL series from Baldor is a DC servo drive providing control for a wide range of Baldor DC servo motors such as the M3300, M4000, and M4500 motors. Providing 600 watts thru 2.25 Kw, the UM comes in models providing 6 amp and 15 amp continuous, with

Baldor's DC high performance servo motors were designed rugged to meet demanding requirements of industrial motion control. They can be supplied with many electrical and mechanical options so the design fits your application. Some of the many options avai

The Kinetix 3 component servo drive provides a cost-effective motion control solution for smaller, low-axis count applications. By providing the ability to apply the appropriate level of control for the application along with downloadable configuration so

Our Bulletin TLY TL-Series™ Servo Motors represent a significant solution for machine designers needing low-inertia, high-performance servo motors. The 230V motors provide substantial power in a small footprint, including high-torque density afforded by s