DESIGN DESCRIPTION:  Design: Manufactory STD;  Manufacture: Factory STD;  Flange: ANSI B16.5, DIN 2501, JIS B2210,BS4504, AS2129, etc.  Four way greater movements provide;  High level of installation flexibilit

DESIGN DESCRIPTION:  Design: Manufactory STD;  Manufacture: Factory STD;  Flange: ANSI B16.5, DIN 2501, JIS B2210,BS4504, AS2129, etc.  Four way greater movements provide;  High level of installation flexibilit

GLOBE VALVE PRODUCT’S SIZE: DESIGN DESCRIPTION: * BOLTED BONNET O. S & Y TYPE * OPTIONAL: WELD BONNET O. S & Y TYPE * CONNECTRION: SOCKET OR THREAD ENDS * THREAD: NPT,DIN SERIAL, BSP,BSPT ETC. * WEDGE DISC * MATERIAL: A105, F304, F316, F11, F22, F304L, F3

GATE VALVE PRODUCT’S SIZE: DESIGN DESCRIPTION:* BOLTED BONNET O.S&Y TYPE * OPTIONAL: WELD BONNET O.S&Y TYPE * CONNECTRION: THREADED END, SOCKETED END * THREAD TYPE:NPT, BSPT, DIN SERIAL ENDS * WEDGE DISC, RENEWABLE SEAT RING * MATERIAL: A105, F304, F316,

SWING CHECK VALVE PRODUCT’S SIZE: DESIGN DESCRIPTION: * BOLTED COVER AND WELDING COVER; * PRESSURE SEAL; * SWING TYPE; * FOR HORIZONTAL OR VERTICAL LINES; * FLANGED ENDS OR BUTT-WELDING ENDS; * RISING FLANGE OR RING TYPE JOINT. PRESSURE GRADE FROM TO

DESIGN DESCRIPTION: * BOLTED BONNET; * OUTSIDE SCREW AND YOKE * WELDING SEAT; * INTEGRAL SEATS; * PRESSURE SEAL * HANDWHEEL OPERATOR; * AVAILABLE WITH GEAR OPERATOR; * FLANGED ENDS OR BUTT-WELDING ENDS; * RISING FLANGE OR RING TYPE JOINT. PRESSURE GRADE

GATE VALVE PRODUCT’S SIZE: DESIGN DESCRIPTION: * BOLTED BONNET * OUTSIDE SCREW AND YOKE FLEXIBLE WEDGE, * FULLY GUIDER; * PRESSURE SEAL * INTEGRAL SEATS; * HANDWHEEL OPERATOR; * AVAILABLE WITH GEAR OPERATOR; * FLANGED ENDS OR BUTT-WELDING ENDS; * RISING

BALL VALVE PRODUCT’S SIZE: PRESSURE GRADE FROM TO CLASS150 6” 32” CLASS300 6” 32” CLASS600 6” 32” CLASS900 6” 32” DESIGN DESCRIPTION: * Cast steel ball valve 150/300/600/900 * Full bore or Venture reduce bore. * Welding ends, flanged ends or welding

BALL VALVE PRODUCT’S SIZE: DESIGN DESCRIPTION: * WELDING CAP * STANDARDS PORT * CONNECTRION: WELDING OR FLANGE ENDS * MATERIAL: DN15~150 Galvanizing Steel DN200~250 Carbon steel DN300 No handle PRESSURE GRADE FROM TO PN40 DN15 DN50 PN16 DN65 DN300B

KNIFE GATE VALVE PRODUCT’S SIZE: PRESSURE GRADE FROM TO CLASS 150 2” 36” DESIGN DESCRIPTION: ONE-PIECE CAST STEEL BODY; BOLTED GLAND, NON-RISI NG STEM; INDUSTRY APPLICATION: PAPER, WATER, WASTE