electric radiator/4000w

Electric Heating
Size: 600 * 380 * 100
Power Maximum Power 4000W; (according to customer needs to adjust power, can drive 1 - 8 group of radiator)
Voltage: 220V;
Noise: no noise;
Automatic LCD digital display, vertical or wall-mounted;
Thermostat range :10-35 ℃;
Application area :80 - 120 square meters;
Weight: 10kg;
Material: cold plate spray; test paint;
Color: blue (based on customer requirements)
Features: 1, thermal conversion efficiency
The technical use of electromagnetic induction heating, energy conservation, heating speed, high thermal efficiency. 3-5 minutes to exit the water temperature reached 60 degrees. Can drive (4-8 groups) radiator cooling, heating area can change or modify heating radiator, than other oil, gas, electricity and heating equipment can save 30% or more.
2, energy saving
Electromagnetic induction heating is the avant-garde atmosphere of the times of green products, the use of advanced frequency conversion technology, 50HZ 20KHZ IF the power is converted to high-frequency power supply, equipment, no noise after startup. Use does not release any harmful gases, no fire, smoke, odor, no pollution problems in many traditional heating equipment in the heating process does not produce fire, truly protect the environment and save energy. Beijing Energy Saving and Testing Center of the authority of detection:
Using electromagnetic induction principle, to 1L water heating, power consumption is 0.117 degrees.
Electric heating pipe, the 1L water heating, power consumption is 0.289 degrees.
Comparing the two, using the principle of electromagnetic induction heating, power up to 2.5 times.
Obviously this test proved that energy-saving features of our products.
3, safe and reliable
Whole water separation, the front circuit, back water, heating the water to go inside the core, the external power walking. Products, constant power, weak control high power, soft start soft-switching, non-contact switch, no starting surge current, safe and reliable.
4, the core of long life by electromagnetic induction heating heating, water heating after the magnetization, not the formation of scale, the entire system maintenance-free. Constant power, variable frequency pulse width by adjusting the high voltage current is automatically reduced when the voltage is low, current will be automatically increased to ensure a constant electric power to ensure the heating effect of heater life and users.
5, the products are small beautiful appearance, can be placed in the living room, bedroom, office.
6, the intelligent control
Microcomputer control, and equipped with an electronic digital signal power sensor (can be adjusted), temperature accuracy, sensitivity, so that the room temperature equilibrium. Thermostat settings and various alarm functions, simple operation, easy to use.
7, low-cost installation and operation
After the successful development of electromagnetic heating and won approval to market quickly, that it has great advantages. Less the cost of long-term operation is its biggest advantage.
8, healthy and comfortable
Very suitable for modern families and small and medium enterprises, hotels, villas, and more suitable for residential buildings there is no collective heating, heating equipment compared with other similar advantages become more pronounced. Using electromagnetic induction, magnetic energy is converted to electrical energy to the heater, the rectifier circuit in the controller will 50/60HZ AC voltage into DC voltage, and then through the control circuit converts the DC voltage for the 20-25KHZ frequency of the high frequency voltage, high-speed change in current through the coil will produce high-speed magnetic field, magnetic field lines when the magnetic field inside the metal container produced by numerous small eddy, high self-heating the metal container and then heating the water inside the container to the heat transfer film to achieve rapid heating purposes. Eddy Current heating not only the most energy, and the heating rate is the fastest, but also the most environmentally friendly, the most security. Automatic 3D high-energy electromagnetic heating system, using a unique 3D dynamic heating technology, and three-dimensional full heating system, heating process is not dead, use the process does not produce scale, magnetized water purification. To enhance the thermal maximum, visible energy efficient. electric conversion rate is higher than 25% of the domestic market of hot water products. heat transfer rate of 98% of the current domestic water heating products produce large amounts of scale using six months, reduce the thermal efficiency of 15%, decreased by 25% after one year -30% Finally, can not be used. market sales of electricity used heating stove is an old electric heater rods, quartz tubes, life in dozens of hours to a few hundred hours (fast heat) heating principle, very energy saving, maintenance difficult or impossible to repair . Electromagnetic heater during use without repair, the use of particularly low cost. 3D electric heating stove of using modern design, microcomputer intelligent automatic control, dual fortification chip leakage, freezing, over-temperature, dry, etc., digital display and shell composed of luxurious design, suitable for low or non-pressure water cycle heating, with radiators, floor, heating and other winter heating, easy to use.
Beijing Energy Saving and Testing Center of the authority of detection:
Using electromagnetic induction principle, to 1L water heating, power consumption is 0.117 degrees.
Electric heating pipe, the 1L water heating, power consumption is 0.289 degrees.
Comparing the two, using the principle of electromagnetic induction heating, power up to 2.5 times.
Obviously this test proved that energy-saving features of our products.