CANBus CANOpen ControlNet FO ring repeater - ci-af11

【Specifications】
Electrical interface
 1 to 2 5-Pin terminal interface, comply the CIA Organization recommends, as well as ODVA.
 Support CAN BUS/DeviceNet/CANOpen bus standard.
 Communication rate: DeviceNet/CANOpen all and normal use can rate grade, up to 1M.
 With the function of 4000V Anti–lightning and 1.5A overcurrent protection, as well as 600W surge protection.
 Termination resistor: the machine without termination resistor provided, please press the need for external.
Optical interface
 Optical wavelength: Multi-mode 850nm, 1310nm; Single-mode 1310nm, 1550nm.
 Transmission fiber: Multi-mode 50/125 um, 62.5/125 um, 100/140 um; Single-mode 8.3/125um, 9/125um, 10/125um.
 Transmission distance: Multi-mode 2km, Single-model 20km, longer distance optional.
 Optical interface type: SC, FC, ST optional, SC preferable.
Power and Protection
 Power: dual-power redundancy input, DC（12-36）V, typical DC24V, power consumption less than 4W, with the function of DC1500V voltage isolation and reverse polarity protection, industrial terminal interface.
 Relay alarm out put: optical fiber link failure and power failure alarm output, the maximum capacity of contact: DC48V/1A, industrial terminal interface.

Mechanical
 Dimensions: 132mm×52mm×105mm (H×W×D)
 Casing: IP30 protection, wave patterns aluminum strength case.
 Installation: 35mmDIN-Rail.
 Net weight: 800g

Environmental
 Operating Temperature: -10-70℃ (-40℃ to+85℃ wide temp optional)
 Ambient Relative Humidity: ≤90% (non-condensing)
 Storage Temperature: -40℃ to 80℃

Testing and certification:
 IEC61000-4-2(ESD) air：±8KV， contact：±4KV;
 IEC61000-4-3(RS) 10V/m（80-1000MHz）;
 IEC61000-4-4(EFT) L-N-PE：±2KV data access：±1.0KV;
 IEC61000-4-5(Surge) L-N：±1KV， L/N-PE：±2KV data access：±0.5KV;
 IEC61000-4-6(CS) 10V（150kHz-80MHz）;
 IEC61000-4-8(MS) long:30A/m， short:300A/m;
 IEC61000-4-11(Dips).
Order Information
Part No. Series Specifications and descriptions Unite
Ci-af11 One electric port, one optical port One standard can interface, one optical interface, DIP switch set the rate, use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-af12 One electric port, two optical ports One standard can interface, two optical interface, DIP switch set the rate, use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-af21 Two electric ports, one optical port Two independent standard can interface, one optical interface, DIP switch set the rate, use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-af22 Two electric ports, two optical ports Two independent standard can interface, two optical interface, DIP switch set the rate, use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-df11 One electric port, one optical port One standard DEVICENET interface，one optical interface, DIP switch to set the rate or rate adaptive mode optional; use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-df12 One electric port, two optical ports One standard DEVICENET interface，two optical interface, DIP switch to set the rate or rate adaptive mode optional; use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-df21 Two electric ports, one optical port Two independent standard CANOPEN or DEVICENET interface, one optical interface, DIP switch to set the rate or rate adaptive mode optional; use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-df22 Two electric ports, two optical ports Two independent standard DEVICENET interface, two optical interface, DIP switch to set the rate or rate adaptive mode optional; use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-of11 One electric port, one optical port One standard CANOPEN interface, one optical interface, DIP switch set the rate, use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-of12 One electric port, two optical ports One standard CANOPEN interface, two optical interface, DIP switch to set the rate or rate adaptive mode optional; use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-of21 Two electric ports, one optical port Two independent standard CANOPEN interface, one optical interface, DIP switch set the rate, use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs
Ci-of22 Two electric ports, two optical ports Two independent standard CANOPEN interface, two optical interface, DIP switch to set the rate or rate adaptive mode optional; use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional. pcs