Construction Machinery

Offering Komatsu excavator bucket teeth . 1. we have got ISO9001:2000 OMS and ISO 14000 EMS2. JCB, CAT, KOMATSU, DAEWOO bucket teeth 3. construction machinery partOur company supply bucket teeth , adapters, side cutter, excavator tooth and pin and so on.

topless tower crane QTZ63P(5013) Technical ParameterJib length----50 mMast Section----1.6*1.6*2.8 mMax.load----5tMax. rated torque----630 KN.mTip load----1.3 t

TOWER CRANE QTZ100 6018 Technical ParameterJib length----60 mMast Section----1.833*1.833*2.8 m/1.833*1.833*2.5 mMax.load----10 tMax. rated torque----1250 KN.mTip load----1.8 t

Jib length----60 mMast Section----1.833*1.833*2.8 m/1.833*1.833*2.5 mMax.load----10 tMax. rated torque----1250 KN.mTip load----1.0 t

1Max. load----6t2jib length----50m3Tip load----1.3t4Free standing height----40 m5Max. height----150m6Size of mast section----1.6×1.6×2.57Material of mast section----∠125×125×10 buckled square steel stiffened plate

TOWER CRANE QTZ50 5010 Technical ParameterJib length-----50mMast Section------1.6*1.6*2.5mMax.load----5tMax. rated torque----630KN.mTip load----1.0tHoisting height----Stationary ----35m/Achor----150 m

Model Unit LB-3 LB-5 LB-10 LB-20 LB-30 LB-40Drawing force T 3 5 10 20 30 40Drawing number 1 1 1 1 1 1Drawing speed m/min 18 18 18 15 13 13Drawing range m/min 3-50 3-50 3-50 3-50 3-40 3-40Speed of trolley m/min 70 70 70 70 65 65Max drawing dia nonferrous

Our wire straightening and cutting machine is with simple operation and easy maintence.1. Cutting part adopts hydraulic cutting device.2. With strict quality control, best performance, durables and little breakdown rate.3. Sound is slight during runnin

Model WSX-12 WSX-24Inlet wire dia. Φ6.5-12mm Φ12-24mmMax. speed 110m/min 100m/minSteel brush 4 4Motor power 4x4KW+1KW (Vacu

The drawing machine is used to draw high carbon wire, medium carbon wire and low carbon steel wire, it is easy to operate, the two capstans can draw the wire at the same time.