Range: Imports all lines included in the From/To range designated. All other lines are ignored. The import range must be specified on a per file basis and is not part of the import format. To set an import range: 1 Before importing a CAD data file, s
. - - . Components showing more leakage than the amount specified are rejected. Those showing leakage less than or equal to the amount specified are accepted. The Voltage Applied field can range from 1 to 48 volts, in 1 volt increments. In absence of
All resistor verifications are programmed the same way. The ERV automatically selects the verification method depending on the value entered in the Value data field. . Example: Mid-range resistor at 1000 ohms, plus or minus 10%. Value = 1000s, Tolerance
#NAME? To enter a value, first enter the value, then enter the suffix that defines the desired units. For example, to enter a value 12000 ohms, enter either of the following. -...... -... Push [Tab]. The cursor moves to the next field and the label fo
This Document Supports IM-UPS 2.4.x and Above -Select . if the left side of a capacitor is negative. -Select ....... if the left edge of a diode is the cathode. Verifier Info The following illustration shows a portion of the Verifier Info entry area of
. -Select .. if it does not matter which way the component is inserted. -Select ... if the component needs to be oriented a certain way when it is inserted. . The Leading Edge at 0° value reflects how the component is oriented in the dispensing head r
. Interconnect Head: This field defines the head on the machine that inserts the component in the board. Whenever the component is requested by the product, the software looks at this field to know which head on the machine to fire. . Orientation in He
. Component ID: This is a unique name that identifies the component. All references to the component use this name. . Category: The category is a predefined group into which a component belongs. -Interconnect: An Interconnect category is provided for
Exit .............................................................................................................................................................................. 25 Changes To This Revision ..............................................
Create/Edit . Edit Product Board . Circuit List Create/Edit Use the Create/Edit option to create or edit a board template. Selecting this option displays the Board window without any data. A new board template can then be created or an existing on
