Why Need Pellet CoolerBiomass pellets or briquettes from pellet machine or briquette machine are with high moisture content above 16% and high temperature degree about 70-85℃, therefore cooler is necessary to low down material temperature to 3-5℃ high

The generator and turbine are connected with one shaft, which is vertical to the ground. Generator stands above the hydro turbine, connected to the turbine through the main shaft, not be affected easily with damp.The features are small stator’s base, hi

The generator and turbine are connected with one shaft, which is vertical to the ground. Generator stands above the hydro turbine, connected to the turbine through the main shaft, not be affected easily with damp.The features are small stator’s base, hi

Horizontal type generator consists of stator, rotor, bearing, cooling system and brake system, etc.The characteristic of horizontal type generator is that the generator and turbine share one shaft in the same plane and its structure is 2 points for suppor

About Sawdust Flash DryerPipe dryer, known as flash dryer or air current drying machine, is not a bad choice for drying biomass materials to the required moisture content. It is the most inexpensive type drying machine nowadays in biomass industry but wit

Used 1x66 MW Power Plant Firing: CoalfiredPressure: 90 kg/cm2Temperature: 530 Deg.C50 hz

Model: SPC-5500Controller Power: 5.5KWPump Power: 5.5KWPump Voltage: 380V-440VRecommend Min. PV Power: 8KWMax. Input Voltage : 700VMPPT Voltage Range: 400V-600VOutput Voltage:Three Phase 380VOutput Current:13AOutput Frequency:0-50/60HZSpecification:Model:

Model: SPC-750Controller Power: 0.75KWPump Power: 0.75KWPump Voltage: 380V-440VRecommend Min. PV Power: 1KWMax. Input Voltage : 700VMPPT Voltage Range: 400V-600VOutput Voltage:Three Phase 380VOutput Current:2.5AOutput Frequency:0-50/60HZSpecification:Mode

Model： SC-MPPT40Rated Voltage： 12V/24V/48V DCRated charge current (Include load current)： 40A Max. Load current： 15AmpMax. PV open circuit array voltage ：105VTypical idle consumption： is less than 10mAProtection&#

Model SC-MPPT10 Rated voltage 12V / 24V Automatic IdentificationMax. Charge Current 10A Max. Load Current 10A Max. PV open circuit array voltage 70vTemperature compensation -4mV/cell (Base 25 Centigrade )Typical idle consumption is less than 10mAProtectio