Heat Sublimation printing ink - Offset printing Specificaton & Trade Terms
| Model | Offset printing |
|---|
| Place Of Origin | china |
|---|
| Price Term | EX-Work |
|---|
| Payment Term | T/T |
|---|
1. Available Range: Only Fit for sheet－fed printing machine to print art paper, coated paper, offset sheet/gelatine printing paper and so on; For single-color and double-color printing.
2. Characteristic: Fast fixation, good stability on this machine, sharp halftone dot restoration and good ink-water balance.
3. Color: Magent, yellow, cyan and black.
4. Application Methods and Precautions:
4.1 Under normal circumstances, used directly on the machine.
4.2. Due to temperature, paper, printing speed and other factors, adjust according to the following rules:
A. Speed up the drying visecosity by the addition of hybrid desiccant and the amount is 0 to 2%.
B. Equipped with special diluted membrane (or film).
C. Adjust the fluidity using the printing varnish #6 and the amount is 0 to 5%.
D. Use visecosity reducer to reduce the viscosity and the fluidity almost kept unvaried, and the amount is 0 to 5%.
E. Reduce visecosity by the addition of 52 to 94 and the amount is 0 to 5%.
5. First work out a sample and print, if no large deviation, then decide sample printing. Since heat transfer ink/sublimation ink will color the gas, the printing can not be carried out according to the normal proportion.
6. A list of the desired temperature about printing
Fabric Name Transfer Printing Temperature Pressure Time
polyester fabric 205oC~220oC 0.5kg/cm2 10~30 seconds
polyester distortion low stretch fabric 195oC~205oC 0.5kg/cm2 30 seconds
cellulose triacetate fiber fabric 190oC~200oC 0.5kg/cm2 30~40 seconds
acrylic fabric 200oC~210oC 0.5kg/cm2 30 seconds
two-acetate fiber fabric 185oC 0.5kg/cm2 15~20 seconds
nylon fabric 195oC~205oC 0.5kg/cm2 30~40 seconds
modacryl(变性聚丙晴纤维) 190oC~220oC 0.5kg/cm2 10~15 seconds
7. Applied performance:
Colour Fastness
solarization
red yellow cyan black
5~6 6 3 3
8. Heat transfer printing temperature should refer to polyester fabric temperature after Alumina Sette, stainless steel, copper and china are coated.
9. Packing Specification:1~2kg/ iron tin Guarantee Period: thhree years
