Specification:Description:CAZ NCAF Non-asbestos sheet is made from synthetic fibre, natural rubber, filling material and dye, compressed and calendered under high temperature and pressure into a sheet form. It eliminates asbestos-rubber sheet essentially

Single Layer PP/PS Sheet Extruder HT-670Technical Parameter:Mode No:HT-670Suitable Sheet:PP, PSMax. Sheet Width:670mmSheet Thickness Range:0.3mm-2.0mmScrew rod Dia.:110 mmScrew L/D ratio:30:1Main Motor Power:45kwMax. Output:150kgs/hr -200kgs/hrRated Power

A. Main Technical Parameter:1. Effective sheet width: 670mm 2. Sheet thickness: 0.3-2.0mm3. Max extruding volume: About 250kg/h (100% new material can reach 250kgs/hr)4. Raw Material:PP, PS Granule5.

Specification:Description:Braided from low-sulphur expanded graphite yarns, reinforced with Inconel wire. It retains all the inherent benefits of CAZ-240 pure graphite packing, good thermal and chemical resistance, very low friction, the wire reinforcemen

Specification:Description:Braided from pure PTFE yarn without any lubrication. It is soft, mainly for static sealing. 250P=250 + PTFE ImpregnationAPPLICATION: Designed for valves and lower shaft speed applications under medial pressure in food processing,

Specification:Description:CAZ 450 PTFE Gasket is molded or skived or cut from virgin PTFE powder or compounds, sheets, rods, tube etc. It has the best chemical corrosion resistance among known plastics. Without being aging, lowest friction coefficient, we

Specification:Description:CAZ RJ640 is machined from solid metal in a variety of shapes and designed for high pressure, high temperature or highly corrosive applications by selecting the most suitable material and shape. It is designed to withstand except

Specification:Description:CAZ 600 Spiral-Wound gasket is formed of V-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it i

Flange Isolation Kits are usd to solve the sealing and insulating problems of flanges, and to control losses due to corrosion and leakage of pipelines. They are widely used to seal flanges and control stray electric currents in piping at oil, gas, water,

Material: EPDMSize: As customer requiredStandard: ASME, EN, DNHardness Shore A: 60~73Working temperature: -30~+120degreeTensile Strength: > 9MPaElongnation: > 500%Compression: > 20%Volume resistivity: 2.9� 104 Certification: ISO9001, BS6920