Malt Deculming MachineThis machine can be employed in malt factories in eliminating rhizome after drying; cleaning out impurity and dirt from during operation through wind power and separating malt rhizome and finished dry malt, so we can get qualified an

Malting unity machineIt the three main processes of barley-soaking, germination and drying that the barley-malt process experiences are carried out in the malting unity machine.It completely changes the traditional malting system, leaves out soaking malt,

SYD-510 Solidifying Point Tester1. SpecificationPurpose: solidifying testTesting Temperature: room temp～ -51℃Temperature-controll Accuracy: ±1℃Structure: Single trough and tow bathsRefrigeration: semiconductor2. FeatureThis instrument i

GD-6536B Low Temperature Distillation Tester1. SpecificationTesting Temperature: 0～60℃Temperature-control Accuracy: ±0.5℃Slynder: double2. Feature: Additional to the features of the otherinstrument, this one has installed compressor re-

GD-255 Petroleum Prodcuts Distillation Tester1. SpecificationTesting Temperature: room temp ～360℃2. FeatureThis instrument is designed and made as per GB/T6536-Test Methods for Distillation of Petro-leum products at Barometric Pressure. It ca

SYD-265H Petroleum Products Kinematic Viscosity Tester1. SpecificaionTesting Temperature: room temp ～100℃Temperature-controll Accuracy: 0.01℃Temperature-controll Style: continuousSlinder: DoubleSample amount: 4ml2. FeaturesThis instrume

GD-265B Petroleum Products Kinematic Viscosity Tester1. SpecificationTesting Temperature：room temp ～100℃Temperature-controll Accuracy: ±0.1℃Temperature-controll Style: continuousSylinder: Single Sample Amount: 2ml2. FeaturesThis

IntroductionThe instrument is designed and produced as per the international standard ASTM D93 and the national standard GB/T261. It is used to test the lowest temperature of a petroleum product sample when the mixture of sample vaporized. The instrument

IntroductionThe instrument is designed and produced as per the international standard ASTM D93 and the national standard GB/T261. It is used to test the lowest temperature of a petroleum product sample when the mixture of sample vaporized. The lowest temp

IntroductionThe instrument is designed and produced as per the international standard ASTM D93 and the national standard GB/T261-2008. It is suitable to test the closed cup flash point of petroleum products whose flash point is higher than 40 ℃.Tech