PRODUCT: Double Walled with double insulation for minimum heat leakage & faster temp. Rise. The outer casing made of thick CRC Powder coated. Heating chambers consist of rectangular horizontal totally enclosed muffle bracket. Heating elements are made of
PRODUCT: The "Saumya" opacity Tester is used to determine optical characteristic of plastics including colour, clarity, general appearance & move directly measurable properties.Direct percentage reading of light passing through specimen.Precious least cou
PRODUCT: The Izod / Charpy Impact Test is used to measure the relative susceptibility of standard test specimen to the pendulum type Impact load.The "Saumya" Izod / Charpy Impacto Meter is having a energy range from one joule to twenty-five joules in five
USP: "Saumya" provides impesct tester for different plastic films, sheets, Decorative laminates, corrugated roofing sheets etc. with range of Darts & selectable facility of height of fall with low efforts. "Saumya" provides two different Electromagnetic s
Fully Automatic Operation. Capacity : 0-15 tones and as per reqirementPlaten size : 250mm x 250mm and as per reqirementDay Light : 150 mmPlaten movement : by hydraulic system (up strokes)Individual micro processor based digital temperature controller for
PRODUCT: ESCR is used for determining the susceptibility of ethylene plastics, to environmental stress cracking when subject to certain conditions. APPLICATION: Environmental stress cracking is a property that is highly dependent upon the nature and level
PRODUCT: The "Saumya" HDT/VSP apparatus is used for determining the deflection temperature limit for specific application and comparing the heat softening characteristics of thermoplastic material at constant bad in oil up to 300degC with spec tied rate o
PRODUCT: The "Saumya" COF tester is designed to determine the co-efficient of friction of plastic films, sheets, laminates, pipes and paper etc. STANDARDS: ASTM D-1894, BS 2782 and other equivalent standards. APPLICATIONS: The co-efficient of friction are
PRODUCT:The Melt Flow Index Test measures the rate of extrusion of a Thermoplastic material through orifice of Specific Length and Diameter under prescribed conditions of temperature and pressure.The "Saumya" MFI Tester are built to measure Melt Flow Rate
PRODUCT: The "Saumya" Hydrostatic Pressure Testing Machine are used to find out the resistance internal pressure of R-PVC, C-PVC, U-PVC, MDPE, HDPE, LLDPE, PP-R pipes, Fittings, Valves etc. as per IS, BS, ASTM and other equivalent standards.The "Saumya" P
