Rubber Machinery

1.working process: Firstly ,put the raw material into furnace,then seal the feed inlet system. Secondly,burned the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system, the reactor will slowly heat ,when the temperature reaches around

1.working process: Firstly ,put the raw material into furnace,then seal the feed inlet system. Secondly,burned the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system, the reactor will slowly heat ,when the temperature reaches around

1.working process: Firstly ,put the raw material into furnace,then seal the feed inlet system. Secondly,burned the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system, the reactor will slowly heat ,when the temperature reaches around

1.working process: Firstly ,put the raw material into furnace,then seal the feed inlet system. Secondly,burned the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system, the reactor will slowly heat ,when the temperature reaches around

1.working process: Firstly ,put the raw material into furnace,then seal the feed inlet system. Secondly,burned the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system, the reactor will slowly heat ,when the temperature reaches around

1.working process: Firstly ,put the raw material into furnace,then seal the feed inlet system. Secondly,burned the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system, the reactor will slowly heat ,when the temperature reaches around

1.working process: Firstly ,put the raw material into furnace,then seal the feed inlet system. Secondly,burned the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system, the reactor will slowly heat ,when the temperature reaches around

1.working process: Firstly ,put the raw material into furnace,then seal the feed inlet system. Secondly,burned the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system, the reactor will slowly heat ,when the temperature reaches around

Parament: Range:X: 450 Y:380 Z:70(Made of order) XYZ accuracy: ±0.02mm Transmission:Rolling screw drive Machine size:800*800*600mm GW:150KGWorking enviroment: Temperature 0-40℃ Humidity 20-90

Parameter: Range:X:380mm Y: 360mm Z:70mm Table Size:X: 372mm Y:382mm Working Speed:6000 mm/min Transmission:Rolling Screw Drive Table load:15KG NW:160KG GW:182KG Power:220V 50HZ 300W Applicable materials: PVC pasta resin ,liquid silicon,