home security alarm systems - 858

What is included:
One (1) KS-858 (433SF) with Keypad LCD display intelligent alarm panel
Two (2) KS-13D Wireless Remote Controllers
Other Accessories included for installation:
1pc User`s Manual, 1pc Phone Line, 2pcs keys, 1pc Antenna, 1pc Power lead, 8pcs 2.2K resistance, 2pcs screw, 3pcs selftapping screws, 3pcs plastic bolt.
All Products are 100% brand new, Unused, Undamaged in its original packaging of gift box

Description:
Installation:
1. Fix the machine case on the wall with nail.
2. Make ground connection to ensure the anti-lightning function of the unit.
3. Control line connected according to the alarm planning.
4. Connect the AC power line and backup battery.
Note: Please install according to the user`s manual.
Communications:
1. Supports ADEMCO CONTACT ID and KS6+2 monitoring center communication protocol.
2. Dial 5 telephone numbers (mobile and pager number); dialing type (tone or pulse) and appointed communication zone can be programmed; alarm telephone is priority.
3. Option for ARM/DISARM and system status report or not.
4. Phone line cut or short-circuit will send an alarm (indicator or siren for optional)
5. Wired zone respond speed: 5ms - 1,000ms; supports normal open, normal close and end- of-line resistance at freedom.
6. Main unit disassembly, slave detector disassembly, AC power cut, backup battery lower and slave detector power lower will activate alarm.
7. Work with wired/wireless siren and linkage device.
8. Latest 30 pieces alarm (month/day/hour/minute) can be recorded and can not be deleted; last arm/disarm time can be remembered.
9. Main unit and wireless PIR detector make communication times in 26 hour to check if there is communication malfunction; if there is a malfunction, the main console will alert corresponding zone within 26 hours
10. Slave detector sends report to main unit for on/off; the report will be remembered in record.
Automations:
1. 16-zone (8 wireless and 8 wired) with 4 x 4 keyboard and lattice LCD display.
2. Voice pre-recorded.
3. 8 partitions can be programmed independently; 8 remote controllers and 8 user codes can be programmed for 8 partition to ARM/DISARM independently.
4. Access codes, 1 installer code, 1 master code, 8 common user code and duress code.
5. Remote arm, disarm, monitor, and on-site alarm setup.
6. Automatically register between wireless PIR detector, remote controller and main console (8 wireless can up to 24 zones, and 8 remote controllers).
7. Zone attribute can be program for fire alarm, medical alarm, emergency alarm at freedom; each zone can be programmed with different remote control.
8. Two timers can be set to arm/disarm independently.
9. Alarm delay (00 - 99 seconds) and arm delay (00 - 99 seconds) can be set for appointed zones.
10. Both AC 220V and 12V, 7Ah rechargeable battery power supplied; and change automatically; the backup battery can work 24 hours or more in standby.
11. Battery lower power alert and discharge protection.
12. Telephone lightningproof.