mobile phone signal booster F10E - F10E

Mini repeater
Small area coverage and indoor distribution
Support GSM and DCS system
Metal coat and Power LED indicator




There are millions of very small areas (5~50 square meters) where people work or live in and suffer from very poor or no mobile signals. People are seeking a cheap and immediate solution that would allow them have clear phone calls or higher speed broad band. However most of the current signal booster solutions usually have larger coverage size, and not cost effective.



F10F-DB is specifically designed as a "CHEAP" solution to meet this request.



1. It supports any two systems of CDMA800, GSM900, DCS, PCS, CDMA2000, or WCDMA.



2. It is quite elegant metal design and can be held in palm, the size is only 152*129*30mm.



3. The power consumption is only 7W.



4. Standard F10F is supplied as a kit, including a donor antenna, a 10 meter long cable and a whip antenna.

Electrical specification Uplink Downlink
FrequencyRange CDMA800 824 ~ 849 MHz 869 ~ 894 MHz
CDMA1900 1850 ~ 1910 MHz 1930 ~ 1990 MHz
GSM850 824 ~ 849 MHz 869 ~ 894 MHz
GSM900 & EGSM 880 ~ 915 MHz 925 ~ 960 MHz
DCS 1710 ~ 1785 MHz 1805 ~ 1880 MHz
PCS 1850 ~ 1910 MHz 1930 ~ 1990 MHz
WCDMA 1920 ~ 1980 MHz 2110 ~ 2170 MHz
AWS 1710 ~ 1755 MHz 2110 ~ 2155 MHz
Max .Gain ≥ 55dB ≥ 55dB
Max .Output Power ≥ 5dBm ≥ 10dBm
Band width (-3dB) Wide Band
Noise Figure ≤6dB
VSWR ≤2.0
Group Delay ≤1.5μs
Frequency stability ≤0.01ppm
Spurious Emission &
Output inter-modulation GSM Meet ETSI TS 151 026 V 6.1.0
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
CDMA Meet IS95 & CDMA2000
WCDMA System Spurious Emission Mask Meet 3GPP TS 25.143 ( V 6.2.0 )
Modulation Accuracy ≤12.5%
Peak Code Domain Error ≤-35dB@Spreading Factor 256
CDMA System Rho ρ > 0.980
ACPR Meet IS95 & CDMA2000
LED Alarm Standard
Power LED Power Indicator
ALC LED Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
LED off after 5 seconds red color
Mechanical Specifications Standard
I /O Port N-Female
Impedance 50 ohm
Operating Temperature -25ºC~+55ºC
Environment Conditions IP40
Dimensions 112*79*17mm
Weight ≤0.5Kg
Power Supply Input AC90~264V,output DC7.5V / 0.8A