stainless steel sheet - LUS010

stainless steel sheet
grade:201,202,301,304,304L,316,316L,410,430,436 etc.
thickness:0.3-3.0mm
width:100-2438mm
length:100-6000mm

surface:
NO.1/ NO.2D /NO.2B /BA /NO.3/ NO.4/ NO.240/ NO.320/ NO.400/HL/ NO.7/ NO.8

Production Standard: ASTM A 240/A240M-06
Grade Chemical composition (%)
C Mn P S Si Cr Ni Mo N Cu
301 0.15 2.00 0.045 0.03 1.00 16.0~18.0 6.0~8.0 - 0.10 -
304 0.08 2.00 0.045 0.03 0.75 18.0~20.0 8.0~10.5 - 0.10 -
304L 0.03 2.00 0.045 0.03 0.75 18.0~20.0 8.0~12.0 - 0.10 -
316 0.08 2.00 0.045 0.03 0.75 16.0~18.0 10.0~14.0 2.00~3.00 0.10 -
316L 0.03 2.00 0.045 0.03 0.75 16.0~18.0 10.0~14.0 2.00~3.00 0.10 -
410 0.08~0.15 1.00 0.04 0.03 1.00 11.50~13.5 0.75 - - -
430 0.12 1.00 0.04 0.03 1.00 16.0~18.0 0.75 - - -



Production Standard: ASTM A 240/A240M-06
Grade Chemical composition (%)
C Mn P S Si Cr Ni Mo N Cu
201 0.15 5.5~7.5 0.06 0.03 1.00 16.0~18.0 3.5~5.5 - 0.25 -
202 0.15 7.5~10.0 0.06 0.03 1.00 17.0~19.0 4.0~6.0 - 0.25 -


304 : Austenitic Cr-Ni stainless steel. Better corrosion resistance than Type 302. High ductility, excellent drawing, forming, and spinning properties. Essentially non-magnetic, becomes slightly magnetic when cold worked. Low carbon content means less carbide precipitation in the heat-affected zone during welding and a lower susceptibility to intergranular corrosion.
Applications: beer kegs, bellows, chemical equipment, coal hopper linings, cooking equipment, cooling coils, cryogenic vessels, dairy equipment, evaporators, flatware utensils, feedwater tubing, flexible metal hose, food processing equipment, hospital surgical equipment, hypodermic needles, kitchen sinks, marine equipment and fasteners, nuclear vessels, oil well filter screens, refrigeration equipment, paper industry, pots and pans, pressure vessels, sanitary fittings, valves, shipping drums, spinning, still tubes, textile dyeing equipment, tubing.
Corrosion Resistance: resists most oxidizing acids and salt spray.


316 : Stainless Steel 316 contains molybdenum. This addition increases general corrosion resistance, improves resistance to pitting from chloride ion solutions, and provides increased strength at elevated temperatures.

316L : Similar to Type 316 for superior corrosion resistance, but also has superior resistance to intergranular corrosion following welding or stress relieving. Good corrosion resistance to most chemicals, salts, and acids and molybdenum content helps resistance. Similar to Type 316 for superior corrosion resistance, but also has superior resistance to intergranular corrosion following welding or stress relieving. Good corrosion resistance to most chemicals, salts, and acids and molybdenum content helps resistance to marine environments. The low carbon content of 316L reduces the possibility of in vivo corrosion for medical implant use. High creep strength at elevated temperatures. 316L has fabrication characteristics similar to Types 302 and 304.
Applications: biomedical implants, chemical processing, food processing, photographic, pharmaceutical, textile finishing, marine exterior trim.