Achieve Operating Points about Briquette Press Machine

Briquette press machine is mainly applied to compress powdery materials which are hard to take shape into briquettes so as to reduce dust, recycle waste materials and improve transportation properties. The commonly used briquetting machines are charcoal briquette machine, small briquette machine, coal briquette machine, lime briquette machine, urea briquetting machine, etc.

For operating briquette press machine, we need achieve the following points

1. the seal should be parallel to the pressure into the seal groove, can not be distorted, damaged scratch the sealing surface.

2. to match the surface before the tie or connection, generally need to add lubricant. Especially bearing parts in the spindle box components and elevating screw nut parts.

3. joins a combination of surface should be checked whether the formation, with or without deformation, or should be finishing, burr to ensure close contact with the joints, smooth, not skewed.

Briquette Press MachineProduction Site of Briquetting Machines

4. the wheel assembly requires two teeth together axle center line must be in the same plane and parallel to each other, should ensure that the normal co-tooth gap, while the axial dislocation ≤ 2MM.

5. the match with the size of the parts to be accurate, should be retested with the size or sampling assembly. For example: the journal of the spindle and bearing with the site, spindle box and bearing with the hole center distance.

6. do the work of cleaning and cleaning of parts. The cleanup includes the removal of residual casting sand, rust, chips. In particular, some important parts, such as gantry cutting machine, the cavity should be coated with anti-rust paint. Parts oil, rust, or attached to the chip available diesel, kerosene or gasoline to clean as washing liquid, then dry with compressed air.