Anesthesia Machine - RIPE-B

Special Feature
 Patient type: Adult , Pediatric and Infant
 Driven mode: Pneumatically driven electronically controlled
 Mode: Semi-open, Semi-closed or closed system
 Anesthetic vaporizer: two vaporizers Halothane vaporizer, Enflurane Vaporizer, Isoflurane Vaporizer, and so on.
 Power supply: 220V±10%,50Hz±1Hz
Power consumption: ≤50W
 Internal battery: DC12V( over 4 working hours)

Anesthesia Ventilator
 Respiration mode：IPPV,VCV,PCV,SIMV,SIGH,MANUAL,STANDBY,DEMO
 Display: 10.4 TFT color screen
 Waveform: P-t, F-t
 Tidal Volume: 20～1600ml
 Respiratory frequency: 1～65bpm
 I:E ratio: 8:1～1:8
 Inspiration pause: 0～50%Ti Inspiration Pressure: 1～60cmH2O Trigger Pressure: -10～10cmH2O
 Monitoring parameters: O2 concentration, MV, Respiratory frequency, Tidal volume, Ppeak, PEEP, I:E ratio, Pmean,etc..
 Alarm parameters: pressure high alarm, pressure low alarm, O2 concentration high alarm, O2 concentration low alarm, MV high alarm, MV low alarm, O2 source failure alarm, AC power failure alarm, etc.
 Pressure alarm setting: Pressure high alarm set 1--60cmH2O
Pressure low alarm set 0--20cmH2O
 O2 concentration alarm setting: O2 concentration high alarm set 21～99%
O2 concentration low alarm set 21～50%
 MV alarm setting: MV high alarm set 10～99L/min
MV low alarm set 0～40L/min
Main Unit
 Circle absorber: Compact circle absorber
 Bellow: 0～1600ml
 Flow meter(background light design):
O2, N2O five-tube flow meter O2 tube: 0L/min～1L/min～10L/min N2O tube: 0L/min～1L/min～10L/min
Air tube: 0L/min～10L/min
 O2 and N2O Linkage Device Adjust O2 and N2O in proportion(keep O2 concentration not lower than 25%)
 Oxygen flush: 35L/min～75L/min
 Gas source pressure: O2: 0.27MPa～0.55MPa N2O: 0.27MPa～0.55Mpa
Air: 0.27MPa～0.55MPa
 Gauge: 4 units, 2 N2O, O2, Air