Consumer classic 64GB CF card

Model: CCF

Interface: CF

Capacity: 1GB-32GB

Sustained Read: 50MB/S

Sustained Write: 40MB/S

Average Access time: 0.2ms

Storage Media: NAND Flash MLC

Input Voltage: 5 V +/_ 5 %

Idle: 0.4 W

Active: 0.75 W

Write endurance: 87 years 100 GBytes write and erase per day at 32GB

Read endurance: unlimited

Wear-Leveling Algorithm: Dynamic and static wear-leveling

Data Retention: 10 years at 25

MTBF: 1,000,000 hours

ECC: Supports BCH ECC 8bits or 15bits in 512 bytes

Bad Block Management: Auto Bad Block Management in system

Operating Temperature: 0-70

Non-operating Temperature: -40-85

Shock: 2,000 G( 0.3 ms half sine wave)

Vibration: 20 G( 40-2000 HZ)

Humidity: 5-95 %

Warranty: 2 years

Physical Dimensions Height: 3.5 +/_ 0.1 mm

Width: 36.4 +/_ 0.1 mm

Length: 42.8 +/_ 0.15 mm

Weight: 20 +/_2 g

Ordering Information C: Commercial Grade

CF: CF Interface

Detail Model

CCF1 ^^^^. 1GB

CCF2 ^^^^. 2GB

CCF4 ^^^^. 4GB

CCF8 ^^^^. 8GB

CCF16 ^^^^. 16GB

CCF32 ^^^^. 32GB

Feature CF interface for traditional commonly used interfaces. Strong compatibility. To achieve high read/write speed. Easy to pull out plug. CF card is a small flash memory CARDS, it can be compatible with most digital music players, digital cameras, laptops, mobile phones, and the MMC card slot device. CF card has very long service life. Even with more than 100 years can also ensure that the data is in good condition: CF card power consumption is only 5% of the ordinary hard disk: seismic intensity is 2000 g, about 10 feet from the falls

Use original MLC chips with high quality, high quality, good stability, can be adapted to extreme environment.

Widely used in industrial control higher requirements for stability, security, space of embedded computer machine.

Payment

1,T/T 30% in advance, balance paid before shipment.

2, L/C

Delivery time

Ten working days after the funds arrived

Quality Control

Timesten deeply understands that quality is the basic weapon for an enterprise to win. Production is conducted according to the international standards. Quality control is carried out by 80 inspectors using equipments from the US and Japan. All raw materials are inspected to meet the RoHS standards before the production. Our long-term, strategic, stable partnerships with key component suppliers ensure product quality and reliability. Four inspection stages during production and a final product testing prior to packing ensure our low defective percentage as 0.2%.

Application

Attendance machine

Measuring machine

Portable computer

Robot

Industrial PC

Board electrical energy storage

Thin client

ATM machines

Industrial PC

Industrial automation and control

Portable computer

POS machines

Embedded Computer

Embedded PAD solution

Medical equipment

Slot machine

Vending machine

Game consoles