Corrugated Board Production Line

High Precision Alloy Steed Corrugated Roller Main characteristics: 1. The materials are high quality chromium and molybdenum and alloy steel. 2. The type of the corrugation is UV type, which is widely used in the world. It is well-designed. The shrinkage rate of the paper is low. The quality of the pressed paperboard is good and with high strength. 3.

It adopts imported precision machine tool, advanced form grinding. The precision size of the corrugated type is accord with the national standards. 4. The teeth of the corrugated roller are middle frequency induction hardening. The top corrugated roller is drum type, with long service.

Corrugated board production line Brief Introduction 1. The line is the special equipment for corrugated board production. 2.

It mainly includes paper stands, single facer, conveyor gap bridge, glue machine, bonding dryer, slitting and line pressing machine, transverse cutting machine, stacker machine, heating system, and glue preparing and glue preparing system. 3.

Different types, different number of equipment can form high, medium and low-grade different levels of three, five, seven layer corrugated line. 4. Our company can produce all kinds of different grades, design speed from 40 to 150 m/min, paper picture from 1400 ~ 2500 mm of three, five, seven layer corrugated line as the customer to choose.

Technical Parameters: Type of corrugation A C BC B Type of corrugation UV No, of corrugation 34±2 38±2 47±2 50±2 Highness of corrugation 4.6~5.0 3.6~3.77 3.0~3.27 2.6~2.85 Outer diameter of roller 240~320 Length of roller 1650~2050