Corrugated belts

The weaving belts of single weft and multi-layer warps are widely used in the corrugated board

production lines, Our produce are

High-speed Corrugator Belt with low noise WSD-9G suitable for average linear speed 200m/min

Mid-speed Corrugator Belt WSD-10Z suitable for average linear speed 130m/min

High-speed Corrugator Belt with Kevlar(low noise) WSD-95G applocable to the corrugating equipment which cardboard width is changed often

Traction Belt / Stack Belt QYD-WDD Belt width:(300-2000)mm

Pneumatic Covering Belt (200-3000) mm

Manufacture various kinds of industrial belts according to customer's requirements.

Products Features Tensile strength: Warp direction (63-70) Mpa. in dry mode

Heat resistance: Raw materials are polyester synthetic fiber, softening point≥260℃

Moisture adsorption: Quick absorption and emission of heat, therefore cardboard can be quickly dried

Air-permeability: Up to 2.08m3/m2 min, under 40mm water column pressure, through CCEP test

Seams: Belt seam part is fabricated with imported steel fasteners and filled with rubber

flat surface, heat-resistance, fastness and non-marking

Suitbalility: Suitable for all types of corrugators, various cardboards and some partcular

operation mode Geometrical dimension: Steady belt dimension, high weaving density, low stretching and contraction and

good contact between belt surface and cardboard

Service life: As long as the same products imported abroad.

Rubber Seam Feature

Belt seam part is fabricated with imported steel fasteners and filled with rubber

Resists tearing, non-abscission

Resists abrasion Resists heating: top up to 230℃

Flat surface. Neither damage flat press device nor damage outer rubber of driving-roller

Smooth surface, non-marking, in favor of printing

Stabilizes transmission, prevents heavy roller from jolting

For a longer service life

Ready-made for preprinting

Suitable for various kinds of heavy-roller corrugators, especially for the new-type

Corrugators with flat press device.