Industrial 7pin SATA Horizontal Socket DOM - I7SAHS

Model: I7SAHS
Interface: 7 PIN Horizontal Socket SATA
Capacity: 1GB-32GB
Sustained Read: 60MB/S
Sustained Write: 50MB/S
4KB Sequential Read IOPS: 5959
4KB Sequential Write IOPS: 2419
Average Access time: 0.1ms
Storage Media: NAND Flash SLC
Input Voltage: 5 V +/_ 5 %
Idle: 0.4 W
Active: 0.75 W
Write endurance: 87 years @ 100 GBytes write and erase per day at 32GB
Read endurance: unlimited
Wear-Leveling Algorithm: Dynamic and static wear-leveling
Data Retention: 10 years at 25
MTBF: 10,000,000 hours
ECC: Supports BCH ECC 8bits or 15bits in 512 bytes
Bad Block Management: Auto Bad Block Management in system
Operating Temperature: 0-70
Non-operating Temperature: -40-85
Shock: 2,000 G(@ 0.3 ms half sine wave)
Vibration: 20 G( 40-2000 HZ)
Humidity: 5-95 %
Warranty: 2 years
Height: 9.5 +/_ 0.25 mm
Width: 24.3 +/_ 0.25 mm
Length: 50.6 +/_0.25 mm
Weight: 10 g

Ordering Information

I: Industrial Grade
7SAHS: SATA Horizontal socket Interface
Detail Model:
I7SAHS1 ..........1GB
I7SAHS2 .......... 2GB
I7SAHS4 ..........4GB
I7SAHS8 ........... 8GB
I7SAHS16 ..........16GB
I7SAHS32 .......... 32GB

Feature:

Capacity can be done is larger, and the price is cheap. SATA II interface is a kinds of new interface. It can support higher top-speed. It backwards compatible SATA, upward compatible SATA III interface.
Customizable vertical or horizontal.
Can be customized with the shell or no shell.
Independent power cable, you can customize the power cable length.
Use original SLC chips with high quality, stable quality.
Widely used in industrial control for stability, cost requirement is stronger; request is not high speed embedded computer machine.


Payment:
1, T/T 30% in advance, balance paid before shipment.
2, L/C
Delivery time:
Ten working days after the funds arrived

Quality Control:

Timesten deeply understands that quality is the basic weapon for an enterprise to win. Production is conducted according to the international standards. Quality control is carried out by 80 inspectors using equipments from the US and Japan. All raw materials are inspected to meet the RoHS standards before the production. Our long-term, strategic, stable partnerships with key component suppliers ensure product quality and reliability. Four inspection stages during production and a final product testing prior to packing ensure our low defective percentage as 0.2%.



Application:
Attendance machine
Measuring machine
Portable computer
Robot
Industrial PC
Board electrical energy storage
Thin client
ATM machines
Industrial PC
Industrial automation and control
Portable computer
POS machines
Embedded Computer
Embedded PAD solution
Medical equipment
Slot machine
Vending machine
Game consoles