JUKI KJ-02 SMT part

+ [PCB SideTeach]. . The screen is displayed. . The board recognition is carried out on the basis of the mask recognition data. 13. Repeat steps 5 to 9. . After the recognition teaching, the screen returns to the screen. 14. Press [Complete]. . The data is saved automatically.

To the next page Page 4-18 1E3C-E-OMB04-A01-00 4.3 Mask Recognition Teaching UNLOCK 15. Press + [PCB side recog test]. . Whether the recognition points are proper and the recognition operation is properly carried out can be checked. 16. Press [PrintPosCalc]. . After checking the teaching data, the screen is displayed. ( 4.4.

Print Position Teaching) UNLOCK 17. Press + [Mask recog]. . The mask-side and the board-side recognition teachings are carried out. 1E3C-E-OMB04-A01-00 Page 4-19 4.4 Print Position Teaching 4.4 Print Position Teaching 4.4.1 About Print Position Teaching The print position is calculated on the basis of the results of the mask recognition teaching.

If teaching has not been performed, it is calculated on the basis of the data sent from PT. 4.4.2 Print Position Teaching Flow Moving the print position Visual check and correcting the positions Registering the data Teaching is complete. Page 4-20 1E3C-E-OMB04-A02-00 4.4 Print Position Teaching 4.4.3 Teaching Procedure UNLOCK 1.

Press + [Print position]. . Teaching is executed automatically. . The screen is displayed, and it displays the taught data. . This step uses the screen of SP80V for description. 2. Turn OFF the servo switch. ) ON ( )OFF ( 3. From above the squeegees, visually check the dislocation between the mask and the print pattern. SERVO 4.

Turn ON the servo switch.