Open Mixing Mill | China Open Mixing Mill - XK-450

Open Mixing Mill

This Open Mixing Mill is mainly applicable for plasticing, warming and mixing rubber. This machine with overturning equipment for rubber.

1. The roll is made of cold hard cast iron LTG-H, whose surface rigidity is HS68-75.There are three types of roll, such as cored smooth roll, cored fluted roll, circumferentially drilled smooth roll. The roll adopts double auto-centering rolling bearings, which are lubricated by lubrication grease.

2. The reducer has hard tooth surface. All the drive gears of reducer are concentrated inside the case, which is well lubricating with spray type and has long useful life.

3. PLC control method

XK-160 XK-230 XK-250 XK-300 XK-360 XK-400 XK-450 XK-560 XK-550B XK-660
Working Diameter of rolls (mm) 160 230 250 300 360 400 450 560/510 550 660
Working Length of Rolls (mm) 320 600 620 750***0 1***0
Front Roll Surface Speed (m/min) 8.95 10.21 14.1 15.1 16.25 18.65 24.26 27.72 27.94 28.6
Refraction ratio 1:1.35 1:1.19 1:1.17 1:1.25 1:1.25 1:1.271:1.27 1:1.2 1:1.22 1:1.24 1:1.09
Max. nip (mm) 4.5 7 8 10 10 10 15 15 15 15
Capacity per Batch(kg) 1-2 6-10 8~15 15~20 20~25 18-35 25-50 35~50 50~60 165
Motor Power (kw) 5.5 15 18.5 22 30 37 55 90 110 245
Dimensions:
(mm) L 1***0 3***0 5***0 7465
W***0 1***0 2***5 3662
H 1***0 1***5 1***5 2080