Open die forging press - Open die forging press

5,000 TON HEAVY 4-COLUMN PUSH-DOWN HYDRAULIC OPEN DIE FORGING PRESS WITH 80 TON FORGING MANIPULATOR
PRESS SPECIFICATIONS
PRESS FORCE: 400.0 BAR (4,700 TONS)
UPSET FORCE: 425.0 BAR (5,000 TONS)
MAXIMUM PRESS STROKE: 2,500.00 MM
MAIN CYLINDER DIAMETER: 710.0 MM
NO. OF CYLINDERS: 3 SET
PRESS DAYLIGHT: 5,000.0 MM
PRESS FORCE STAGE @ 425 BAR
1ST STAGE (ONE-CENTRAL CYLINDER): 16.7 MN
2ND STAGE (TWO-SIDE CYLINDER): 33.4 MN
3RD STAGE (THREE-ALL CYLINDER): 50.0 MN
DISTANCE BETWEEN COLUMNS CLEAR WIDTH: 4,000MM X 1,800MM
TABLE SHIFTING DEVICE STROKE (LEFT X RIGHT): 3,000MM X 3,000MM
DIE MAGAZINE: 4-DIE MAGAZINE
NUMBER OF PRESS STROKE
FORCE STAGE PENETRATION RETURN STROKE STROKE/MINUTE
3-CYLINDERS 150MM 300MM 10/12
3-CYLINDERS 100MM 200MM 15/17
2-CYLINDERS 50MM 100MM 25/30
1-CYLINDERS 5MM 20MM 80/85
WEIGHT OF PRESS (DIE MAGAZINE/DIE SHIFT): APPROX. 900 TONS (1,984,140 LBS)
OVERALL DIMENSION OF PRESS
TOTAL DIMENSION OF PRESS: 14,370 MM
PRESS HEIGHT ABOVE FLOOR LEVEL: 10,870 MM
DEPTH: 3,500 MM
QUANTITY OF PUMPS: 8
PRESSURE OF EACH PUMP
1) RX 360 (2): 400 BAR, MAX 500 BAR
2) RF 1000 (6): 400 BAR, MAX 450 BAR
HYDRAULIC SYSTEM: HYDRAULIC