PTFE/Teflon Mesh Belts

PTFE Mesh Belts is suited for conveying products within highly efficient air distribution systems allowing optimised moisture removal to take place and is commonly used within ultra violet and infra red dryer units. The open area allows maximun air flow optimising drying times whilst its extreme properties make it a natural choice for dryer manufactures.

Applications:PTFE mesh belts are used in applications such as the drying of printed products for example:point of display stands,T-shirts,glass and mass produced paper prints. Print dryers usually opt for Ultra violet,infra red or hot air as the heat source to dry. Other applications range from the drying of cereals,non woven’s charcoal interlings,carpet & carpet tiles,printed circuit boards and shrink-wrap tunnels but to name a few.

Features and Benefits
PTFE open mesh conveyor belt is light weight and cost effective therefore is easy to handle and less expensive than wire alternatives that can be difficult to replace. Often supplied with a metallic clipper type fastener these style of belts can easily be removed and replaced therefore minimising downtime and saving money. This material can be offered in carbon loaded black therefore providing antistatic properties.

Main Properties:
1) Chemical inertness
2) Temperature resistant from -60ºC~+260ºC
3) Ultraviolet,infra-red,microwave,radio frequency resistance
4) Non-Stick surface
5) Food Approved(USFDA)
6) Lightweight and energy efficiency for economical operation

PTFE Mesh Conveyor Belt:

Style Number		FGG-5090	FGG-5110	FGG-5110*2	FNX-5130	FKG-5150
Woven Substrate	Warp	Fiberglass	Fiberglass	Fiberglass	Nomex	Kevlar
	Fill	Fiberglass	Fiberglass	Fiberglass	Nomex	Fiberglass
Weight[kg/m 2]		410±10	470±15	580±20	520±20	1530±20
Thickness	Mil	37	43	45	51	60
	MM	0.95±0.05	1.10±0.05	1.15±0.05	1.30±0.05	1.5±0.05
Tensile strength [kg/cm]		28.9±1.5	31.0±1.5	31.0±1.5	28.1±1.5	82.3±1.5
Elongation Tension Area		<1.1%	<1.1%	<1.1%	<1.1%	<0.5%

PTFE Seamless Conveyor Belt:

Standard thickness fabric 14.0-16.00/mil 0.35-0.40(mm)
Width most 60/in 1500(mm)
Seamless belt Girth (mm)
1360	1380	1440	1470	1510	1520	1530	1540	1550	1560
1580	1600	1640	1660	1680	1730	1740	1780	1820	1830
1840	1850	1870	1880	1950	2000	2040	2100	2230	2240
2250	2310	2320	2420	2440	2450	2500	2600	2630	2750
2800	2820	2850	2880	2900	3050	3080	3090	3200	3450
3540	3590	3820	3850	3890	3900	3920	3930	4200	4270
5100	5270	5400	5640	5800	6000	6440	6700