PU Foaming Injection Machine

a. Machine type：WHPU150 b. Kinds of foam applied for：rigid foam c. Viscosity：（220C）polyether glycol 2000Mpas; isocyanate 1000Mpas d. Injection quantity：（mixing ratio: 1:1）290-2860g/s e. Injecting time：0.5g-99.99s (precision to 0.01s) f.

Polyether glycol measure unit：pump type A2VK55; motor power：22kw rotate speed of motor：1450rpm ;lubricating method of pump shaft seal：automatic g. Isocyanate measure unit：pump type A2VK55; motor power: 22kw; rotate speed of motor: 1450rpm; lubricating method of pump shaft seal: automatic h. Component filter：streamline type filter i.

Testing device：refluence test j. Hydraulic unit：pump flux 14L/min; motor power 5.5kw（with 2 accumulator） k. Mixing head：MK20-2/76 l. Material pot：available cubage 250L; beater power 0.75kw permit working pressure 0.45MPa; out layer with water jacket for heat preservation m.

Standard temperature controlling unit：heating 6kw×2 Cooling water supply 10℃-140C; 1m3 /h; 0.1-0.2MPa cooling unit 15000Kcal/h n. Compressing air supply：P:0.45MPa Q: 500NL/min (require the compressed air be clean, dry and without oil) o. Electrical source：3×380V/50HZ input power：65kw