Pad Printing Silicon Rubber

Pad Printing Silicon Rubber description

Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.

Pad Printing Silicon Rubber Features

1)High print times

2)abrasion resistance. 

3)Good printing effects

4)Permanent and durable Pad Printing Silicon Rubber Operation Instructions: 

Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the vacuumed mixture into the original mold slowly,when it turns dry,you can take the product out,then the mold is done.

Shelf life for Pad Printing Silicon Rubber

8~10months, when stored in a dry & cool place under the room temperature 25.

Packing for Pad Printing Silicon Rubber

20kgs/drum vacuumed packing

For further information, pls contact with Miss Hebbe

Welcome to visit www (dot)szrl (dot)net anytime .