Plaster Molding RTV Silicone Rubber

Description of Plaster Molding RTV Silicone Rubber:

Plaster Molding RTV Silicone Rubber is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 4-6 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion.

Applications of Plaster Molding RTV Silicone Rubber:

A: Cultural relic duplication, architectural decoration, statues B: Polyester Resin crafts C: Lighting ornaments, soap, candles molding D: Plaster, Gypsum, Cement, Concrete decorations F: Model design, product exploitation, etc.

Procedures of mold making by RTV Silicone Rubber:

1. Clean and prepare specimen (apply consolidant, sealant, or release agent if necessary). 2. Build retaining wall around specimen. 3. Stir silicone base to loosen any settled material. 4. Decant desired amount of silicone into mixing container. 5. Mix in appropriate amount of catalyst. 6. Apply to specimen. 7.

If reinforced mold is desired, gently press in gauze after pouring fist layer. 8. When cured, gently remove mold from specimen. 9. If needed, create rigid backing or jacket over mold with plastic, urethane foam, or plaster. 10. Remove backing material and mold. Store mold inside rigid backing.