PoE Gigabit Industrial Ethernet Switch

Introduction

The OP-GYP104G switches 4-port Unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on port 1-4. The switches are classified as power source equipment (PSE), and when used in this way, the OP-GYP104G switches enable centralization of the power supply and provide up to 15.4 watts of power per port.

The switches can be used to power IEEE 802.3af compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network.

In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits

Comply to IEE 802.3 10Base-T,IEEE802.3u ,100Base-TX/FX, 1000Base-TX/FX Provide a SC single-mode /multimode optical port and 10/100/1000M RJ45 port, support for Full/half duplex mode and auto MDI/MDI-X connection Comply to IEEE 802.3af , provide power for the IP cameras over Ethernet Dynamic LED indicator, display the current operating status, providing a simple working condition and troubleshooting tips Adopt IEEE 802.3x Standard full-duplex flow control ,with standard duplex Backpressure flow control

Port Configuration

RJ45 Port: Auto-negotiation, 10/100/1000Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters. 1000Base-FX Optical Port: LC/SC/FC/ST optical port Single-mode:20, 40, 60, 80, 100,120Km,optional Multi-mode: 2, 5Km,optional Wavelength: 850nm, 1310 nm, 1550nm

Power Input options

Input Voltage: 48V DC (46~50VDC) ,Redundant power input Overload Current Protection Support dual power backup Support dual power alarm input Connection: 6 pin terminal

Environmental Limits

-40℃ ~ + 80℃( Wide Temperature) Storage Temperature:-40℃ ~ + 85℃ Humidity: 5% ~ 95%

Mechanical Dimension

Dimensions: 61 x 120 x 140 mm House Protection: IP40 protection, Aluminium Alloy Installation: DIN-Rail or wall mounting Weight: 730g

Approvals

FCC/CE/LVD/EMC EMS: EN61000-4-2 (ESD)，Level 3 EN61000-4-3 (RS)，Level 3 EN61000-4-4 (EFT)，Level 3 EN61000-4-5 (Surge)，Level 3 EN61000-4-6 (CS)，Level 3 EN61000-4-8，Level 3 Shock: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6

Warranty

5 years