Polyurethane foam injection grouting machine

BEIJING JIANHAI ZHONGJIAN : 1/ Manufacturer Direct Wholesale Sales

2/ The bigest waterproof coating manufacturer in China 3/ Laboratories with Professional and powerful Research&Development team to support technical service 4/ Three big factories are distributed in China(Beijing-Changping,Beijing-Fangshan,Jiangsu-Xuzhou) 5/ ISO9001 Quality Management System,iSO14001 environment management system and OHSAS certificated 6/ Get involved many big projects in China like subway,tunnel,civil building,comercial building etc.

7/ Excellent exported experience,exported to Africa,America,Australia,Russia ,Europe,Malaysia,Dubai,Middle east etc Polyurethane foam injection grouting machine Brief instructions: Importing foreign advanced technology to create a new kind of miniature machine, using within the high voltage power to inject the grout into concrete,in order to reach the purpose of water plugging, the key parts of the machine is made by new materials synthesis,more wearable and closed tighter, its very light and easy to handle and keep in good repair.

Main features: 1.Light weight(5-8kg),small volume(50cm tall),easy to carry and handle. 2.Good product with proven technology,reasonable structure and multi-purpose. 3.Sturdy and durable,easy to clean and repair. Packaging: *Single item carton:50X20X40 CM

Where to use:

Its used for water-based and oil-based slurry injecting,plug and reinforce the concrete.

How to use:

1.Use 220 V alternating current (ac) 2. Before using:Check the connection of the high-voltage tube,make sure that the pressure gauge is normal without looseness, slurry must be clean without sundry.

3.Grouting process:Set up a operation platform→plug in→crack&leak analysis→bore holes→embed the needle(leave the black part in the hole)→connect the needle driver between the needle and the machine→inject slurry in the hole→wait for solidification→knock off the needle(the black part should be left in the hole)→clean and repair the surface.

Malfunction removal: 1.The needle driver leaks: Tighten the screw,change the rubber pad inside,or change another needle driver. 2.The pressure cannot be increased: Clean or change the steel ball spring,clean and dredge the charging barrel,clean or change the force pump.

3.The motor does not work: Check the plug is connected well or not,Clean the gearbox in time.