RTV-2 pad printing Silicone rubber

The usages of pad printing silicon rubber: The silicon rubber is mainly used for printing irregular patterns of plastic toys, electroplating toys, trade makers. Silicon pad printing is a carrier which transfers the patterns on the steel plate onto the toys products’ surface.

Features of pad printing silicon rubber: Pad printing silicon rubber with high print times and abrasion resistance, without any impurities, with good printing effects, permanent and durable, we can provide all kinds of colors are available and our catalyst is free charged.

Operation instructions: Pad printing silicon rubber is two-component silicone, part A is the liquid silicon rubber, part B is the catalyst. The usual mixing ratio for silicone rubber and catalyst is 100: 2-3, eg. we take 100grams of liquid silicon rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold.

Then after 2-4 hours, you will obtain a printing pad. FAQ of pad printing silicon rubber:

What will cause the problem that the silicon pad has a short lifetime? (1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags. (2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil.

The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad. (3)All the users should know the properties of pad printing silicone rubber.

The service life of the silicone pad has close relationship with the size of the printed patterns.

For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)