TPV resin for automotive parts

KD-155AN is made in using the dynamic vulcanization high-tech high-performance EPDM/PP thermoplastic elastomer. It has good environmental resistance,low compression deformation performance;It can use the way such as extrusion,injection molding,blow molding processing molding,do not need to conventional vulcanization process of rubber processing;It is easy dyeing,make product design more flexible;It can be recycling reuse,more in line with environment protection requirements.

The typical performance in the following table

Physical Properties Test Standard Typical Value Unit

Hardness GB/T531 ISO 7619 55 Shore A

Density GB/T533 ISO 2781 0.97 g/cm3

Tensile Strength GB/T528 ISO 37 4.9 MPa

Elongation at Break GB/T528 ISO 37 460 %

Tear Strength GB/T529 ISO 34 15 kN/m

Melting Index GB/T3682 ISO 1133 3.8 g/10min

Attention:Did not indicate the test temperature above is 23℃

Application Automotive: weather seals, underhood and undercar, interior components etc.

Consumer products: home and gardan tools parts, personal care such as toothbrush, wheels etc

Electrical: wire cable, headphone cable, telephone cover etc.

Building and constructions: plumping and some joints etc.

Industrial: Hose system, seals, rolls, gasket and grommets etc.