WDM 4 10/100M Media Converter

Fast ethernet 4 10/100M Media Converter

Features

•Complies with IEEE802.3 and IEEE802.3u 10/100Base-TX and 100Base-FX •MTU size supported 1600 bytes maximum •Supports pure converter mode data forwarding for extreme low latency •Built in 128Kb RAM for data buffer •Supports modified cut-through frame forwarding for low latency •Optional forward fragments •10/100Mbps and full/half duplex automatically configure in TP port •Supports end fault function (optional) •MDI/MDI-X Auto Negotiation •Support EEPROM configuration •LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL. •FCC Class A & CE approved •LLR, LFP - Link Loss Return (LLR), Link Failure Pass (LFP) features supported •RoHs compliant •Only 1 fiber used instead of 2 - WDM BiDi technology •Stainless steel parts (value added feature) •Standalone, Wallmount or Hotpluggable in 19' chassis - universal design Introduction

The 3C-WDM-400-35-20 &3C-WDM-400-53-20 converter complies with IEEE 802.3 standards. It is designed to convert data signal between 10/100 Base-TX and 100 Base Fx Fast Ethernet. The media converter is connected between Fiber cable and twisted cable segments with network operating smoothly.

This converter can be used as a standard alone unit or a slide-in module to fit the 19 converter rack. Adopting WDM technology, 3C-WDM-400-35-20 &3C-WDM-400-53-20 takes only one fiber cable to transmit and receive data, which will save half cabling cost for you.

BiDi WDM - Wave Division Multiplexing Technology allows you use just a 1 fiber cable instead of 2, because transmit and receive channels are separated by different wavelenghts.

Also, it does not matters, what type of TX/RX are you using at central side or remote side, they will always operate smooth