Weidmuller UPS Power Supply 1370040010

Weidmuller UPS Power Supply 1370040010

General ordering data

Order No. 1370040010

Type CP DC UPS 24V 40A

GTIN (EAN) 4050118202342

Qty. 1 pc(s).

Dimensions and weights

Length 150 mm

Width 66 mm

Height 130 mm

Depth 150 mm

Weight 1,000 g

Net weight 1 Kg

Temperatures

Operating temperature -25 �C...+70 �C

Storage temperature -40 �C ...+ 85 �C

Battery module

Parallel connection option [battery] yes, max 2.

Rated voltage 24 V

Storage medium [battery] 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch

Intergated battery charger

Battery availability test every minute

Charging current 0.15 CA

Charging feature IU characteristic curve

Charging voltage (temperature compensated) 27, 48 V 20�C

Temperature coefficient - 48 mV / �C

Operating interfaces and control inputs

DIP switch Inversion of transistor outputs, Operation without temperature probe

Remote disconnection (Interlock) Yes

Selector switch battery 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, No Battery, Service

Selector switch buffer times 0.5 min, 1 min, 3 min, 5 min, 10 min, 20 min, 30 min, 45 min, ∞, ∞ w/0

Temperature probe NTC 10 kΩ

Input

Conductor connection system Screw connection

DC current consumption max. 200 mA (without battery), max. 0.5 A (with fully charged battery)

DC input voltage range 20...30 V DC

Input current ≤ 43 A

Input fuse (internal) Yes

Max. approved input current 52 A

Output

Conductor connection system Screw connection

DC current consumption max. 200 mA (without battery), max. 0.5 A (with fully charged battery)

DC input voltage range 20...30 V DC

Input current ≤ 43 A

Input fuse (internal) Yes

Max. approved input current 52 A

General data

Buffer times Depending on the connected battery

Clip-in foot metal

Current limiting > 120 % IN

Degree of efficiency ≥ 96% normal mode, battery is being charged, ≥ 98% normal mode, battery is charged, ≥ 98% buffer mode

Housing version Metal, corrosion resistant

Humidity 5...95 %, no condensation

MTBF > 500,000 h acc. to IEC 1709 (SN29500

Mounting position, installation notice Horizontal on TS35 mounting rail, with 50 mm of clearance at top and bottom for air circulation. Can be mounted side by side with no space in between.

Operating temperature -25 �C...+70 �C

Power loss < 10 W

Protection against reverse voltages from the load 32�34 V DC

Short-circuit protection Yes

Storage medium 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch

Surge voltage category III

Weight 1,000 g

EMC/shock./vibration

Noise emission acc. to EN55022 Class B

Vibration resistance IEC 60068-2-6 2.3 g

Interference immunity test acc. to EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips)

Shock resistance IEC 60068-2-27 30 g in all directions

Insulation coordination

Class of protection III, with no ground connection, for SELV

Insulation voltage 1 kV DC

Pollution severity 2

Surge voltage category III

electrical isolation, input-earth 1 kV

electrical isolation, output-earth 1 kV

Electrical safety(applied standards)

Electrical machine equipment Acc. to EN60204

For use with electronic equipment Acc. to EN50178 / VDE0160

Protection against dangerous shock currents Acc. to VDE0106-101

Protective separation / protection against electrical shock VDE0100-410 / acc. to DIN57100-410

Safety extra-low voltage SELV acc. to EN60950, PLEV acc. to EN60204

Connection data (input)

Conductor cross-section, AWG/kcmil , max. 6

Conductor cross-section, AWG/kcmil , min. 26

Conductor cross-section, flexible , min. 0.5 mm2

Conductor cross-section, rigid , max. 16 mm2

Conductor cross-section, rigid , min. 0.5 mm2

Reverse polarity protection Yes

Tightening torque, max. 1.5 Nm

Tightening torque, min. 1.2 Nm

Wire connection cross section, flexible (input), max. 16 mm2

Connection data(output)

Conductor cross-section, AWG/kcmil , max. 6

Conductor cross-section, AWG/kcmil , min. 26

Conductor cross-section, flexible , max. 16 mm2

Conductor cross-section, flexible , min. 0.5 mm2

Conductor cross-section, rigid , max. 16 mm2

Conductor cross-section, rigid , min. 0.6 mm2

Tightening torque, max. 1.5 Nm

Tightening torque, min. 1.2 Nm

Connection data(signal)

Wire connection cross-section, flexible (signal), max. 16 mm2

Wire connection cross-section, flexible (signal), min. 0.5 mm2

Wire connection method [Signal] Screw connection

Wire cross-section, AWG/kcmil [Signal], max. 12

Wire cross-section, AWG/kcmil [Signal], min. 26

Wire cross-section, solid [Signal], max. 16 mm2

Wire cross-section, solid [Signal], min. 0.5 mm2

Signalling

Floating contact Yes Status indicator Three-colour LED: battery capacity > 85% green, > 40% yellow, > 20% red, < 20% red (blinking), Green/yellow LED: normal / buffering, Yellow/red LED: temperature alarm / alarm, Yellow/red LED: switch-off / battery fault

Status relay (max. load) Fault (alarm) (30 V AC/DC 0.1 A), Battery operation (buff.) (30 V AC/DC 0.1 A), Laden (Charg.) (30V AC/DC 0,1A)

Classifications

eClass 6.0 27-04-06-03