metalized film for capacitor use

Products: Aluminum metalized polypropylene film Aluminum-Zinc alloy metalized polypropylene film Aluminum-Zinc alloy metalized polypropylene film with heavy edge Aluminum metallized polypropylene film Aluminum-Zinc alloy metallized polypropylene film Aluminum-Zinc alloy metallized polypropylene film with heavy edge Aluminum metallized polyester film Aluminum-Zinc alloy metallized polyester film Aluminum-Zinc alloy metallized polyester film with heavy edge

Cores Material: Plastic Width: Film Slit Width According to the customers demand

Inner Diameter: According to the customers demand Roll Outer Diameter: For slit widths 4.0mm up: 155 mm (with certain deviation) For slit widths 10.0mm up: 180 mm (with certain deviation) For slit widths 25.0mm up: 240 mm (with certain deviation) * Rolls: Film is wound on solid cores, with the metalized layer inside.

Rolls are wound up to the specific outer diameter. The loose end of film is held in place by a closing sticker. Rolls are always packed in pairs. There is plastic foam between the rolls to protect the electrode side. Packing: Inner: The piled rolls are packed in plastic bag and heat sealed with desiccants after vacuum removal.

Labels inside the bags mark film type, thickness, width, free margin width and resistance. Outer: The bags are packed in carton cases. The carton cases are packed in wooden cases or reinforced carton. * Storage: 1. Film should be stored in its original packing until use. The temperature should be controlled to 5 ~ 35℃ and humidity less than 85%RH. 2.

On exposure to moisture, the thin metalized layer is likely to be easily oxidized. Therefore, after the packing is opened, the rolls should be used as soon as possible. 3. It is recommended that the opened rolls be stored in temperature conditions of 15~25℃ and humidity of less than 60%RH. 4.

Film kept sealed in the original packing and stored as described above is guaranteed according to the following conditions: Al metalized Film: 12 months from the delivered date.

Al/Zn Alloy metalized Film: As Zn is relatively unstable; preservation period depends on the resistance of the film: 10 Ohms or less 6 months (from delivery date) 10 to 15 Ohms 3 months 15 Ohms 1 months We also have other kinds of film, such as pet etc. We still have other special film To know more ahsfcxd (at) hotmail (dot) com can help you.

I am looking forward to make friends with you, Dear Sir/Madam. Best Regards!