sanitary stainless steel pump

The pump is foraged and with stainless steel motor cover. With sanitary and cost-effective design, it is ideal for dairy, beverage, food processing, pharmaceutical and fine chemical industries.

Operating Principles

Housed inside the casing, the impeller rotates in conjunction with the pump shaft. With this arrangement, the impeller blades convey energy to the fluid in the form of kinetic energy and pressure energy.This pump is not reversible by simple reversal of the direction of rotation. The direction of rotation is clockwise when the pump is viewed from the rear side of the motor.

Technical specifications Max. flow: 150 m3/h

Max. head: 70H(m)

Max. pressure: 7 bar/99 PSI

Max. temperature: 120

Max. rev.: 3600 min-1

Design and features

Casing manufactured with cold-formed plate. Open impeller and close impeller manufactured with stainless steel investment casting. Adjustable stainless steel legs. Pump designed according to 3A sanitary standards. IEC B34 motors, IP 55, F-class insulation,50HZ 60hz

Mechanical seal in C/St. S and SiC/Sic Gaskets in FPM (Viton) and PTFE

Connections: Clamp, thread, flange, DIN,SMS,RJT,IDF

Motor: 2900,1450,3600 rev./min., 50HZ,60HZ

Parts in contact with media: AISI 316L/AISI304

Other parts AISI 304 Gaskets (standard): EPDM (FDA approval)

Mechanical seal (standard): SIC/SiC/EPDM

Inside surface finishing: Ra0.8 um

Outside surface finishing: Sandblast or Mirror polished