spllit pressure solar water heater

Split pressure solar water heater consists of TINOX flat plat collector,storage water tank,workstation,circulating mains and bracket.

1 water tank a.magnesian stick b.electrity heater c.check valve d.safeguard high-temperature/high pressure e.prevent creepage 2 Heat focus apparatus: Flat plate collector,TINOx coating 3 Frame :a.Aluminum alloy b.thickness 1.2mm c.Angles is optional 4Heat exchange :a.Copper coil,diameter16mm b.thickness 1.0mm c.heat area:upper 0.4 ,below 0.8 5 Pump 6 Working station 7 Expansion tank 8 others Control system is the heart of parted .Main technical function: 1.

Full auto-control water function 2. Constant temperature,timing electric heater(Power 1.5-4.5 kw) 3. Setting temperature(30 centigrade-90centigrade),setting water level(50%-100%) 4. Manual water ,supply water of ,auto-water after 15 minutes without water auto-stop after full. 5.

Prevent frostbite circulation(Forcing circulation when water temperature of the heat collector below 2 centigrade) 6. Manual circulation(the time of circumfluence could been set 5-99 sec.)Once open,hot water coming. 7. Supply hot water by manual pressure,manual close pressure or auto-close pressure function after 30 minutes. 8.

Avoiding without water heater function (supply level to 50% firstly ,then auto-startup electric heater when water level below 50%)